How to Edit WIFI for a Sensor

1. Open the SimpleSENCE Mobile App

2. Select one of the sensors listed on your "Sensors" screen 

3. After selecting a sensor, select "Edit WIFI" from the menu that appears on the screen

4. Follow the directions on screen to pair to your sensor

5. Select your WIFI network's name from the list of networks

6. Enter the WIFI password, then press "Done" when finished

7. Verify the signal strength and press "Done" again

8. Test your sensor by holding your finger across the metal sensing strips for about 10-15 seconds

9. Verify that text and/or email alerts were sent to all the contacts on the sensor's notification list

As always, if you want to contact us directly for questions or walkthroughs, you can do so by clicking here.